C1855Z - FLAT CORNER LARGE - male - stacking
- SKU:
- C1855Z
- Availability:
- In Stock
- Weight:
- 0.16 LBS
- Width:
- 2.25 (in)
- Height:
- 2.00 (in)
- Depth:
- 2.25 (in)
- Shipping:
- Calculated at Checkout
Description
Large Steel Flat Corner With Male Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.
Rivets Required For Installation: 6 OUR RIVETS DO NOT FIT THESE HOLES - EITHER DRILL THE HOLES OUT WITH YOUR 3/16" DRILL BIT OR SMALLER RIVETS MUST BE PURCHASED AT YOUR LOCAL HARDWARE STORE.
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
All Cases
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions
- Mates wit 1035
Material: 1.5mm/ 0.059" Steel
Additional Information
Specifications Drawings: |
See Parts Pictures Above |
Mates With: |
CNS1035 |
Related Products
Related Products
C1150Z - FLAT CORNER - MEDIUM - male stacking
$1.70
Medium Steel Flat Corner With Male Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
C1860Z - FLAT CORNER - LARGE - female - stacking
$2.10
Large Steel Flat Corner With Female Stacking Dimple. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
C1539 - LARGE RIBBED PLASTIC STACKING CORNER
$1.10
Large Ribbed 2-Leg Plastic Stacking Corner - Flush mounts to wodden cabinet corners, or over top of carpet-covered cabinets.Screws Required For Installation: 4 (not included)Materi
C1568 - LARGE CHEVRON PLASTIC STACKING CORNER
$1.10
Large Ribbed 2-Leg Plastic Stacking Corner - Flush mounts to wodden cabinet corners, or over top of carpet-covered cabinets.Screws Required For Installation: 4 (not included)Materi
C1935Z - FLAT CORNER - MEDIUM - stacking - female
$2.10
Medium Steel Flat Corner With Female Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
C1850Z - FLAT CORNER - LARGE
$2.10
Large Medium-duty Steel Flat Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6 OUR...
1202 - STEEL FOOT LARGE - MALE - stacking option
$1.90
Heavy duty steel foot. May be used in any case design that requires a small lift off of a surface when the case is resting. This foot can also be used in conjunctions with 1203 for Bolts or...
10231 - FLAT CORNER LARGE - 6 hole
$1.40
Heavy Duty Flat Corner6 Mounting HolesInternal Radius: 3mm / 1/8"
Material:
C1351-STACK - LARGE BALL CORNER with new interlocking cut outs
$2.10
Large Ball Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.Also available C7082-STACK medium flat corner.1.18" Offset3 Mounting Holes