E0775/2000-100 - SINGLE ANGLE WITH RIVET HOLES ( 6.5 ft. length)

Single Angle Corner Extrusion. Provides a framework for cases that are created "box style" with butt joints (overlapping panel corner edges). An alternate choice to our Double Angle Corner Extrusions. Cutting this extrusion follows the same methods as our Double Angle Corner Extrusion. See our cutting tips video tutorial
 
NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together if they incur harsh handling during the shipment process. This is not abnormal, and is easy to remedy by rubbing the extrusions with some #0000 Fine Grade Steel Wool, cheaply available at any hardware store.

Rivets Required For Installation: Varies depending on length of section used, as well as associated parts that may be riveted through it.

Depending on your case design some rivets may require backing washers. Most rivets will install through the interior leg of the extrusion and therefore require no backing washers.

RECOMMENDED USES:
All cases regardless of wall panel thickness.

MINIMUM RECOMMENDED CASE DIMENSIONS:
Any case

EXAMPLES
- All Cases

ASSOCIATED COMPATIBLE PARTS:
- All Of Our Corner Braces.

Material: Mill Finished Aluminum