E2215/2000 - U CHANNEL - 3/8" (6'6" LENGTH)
- SKU:
- E2215
- Weight:
- 0.72 LBS
- Width:
- 0.65 (in)
- Height:
- 79.00 (in)
- Depth:
- 0.35 (in)
- Shipping:
- Calculated at Checkout
2 Reviews
-
U Channel
Very nice prduct.
-
Nice finishing cap!
Very hard material, so it won’t bend easily. Cuts easily with a saw blade.
Related Products
Related Products
E2210/2000 - U CHANNEL 1/4" (6'6" ).
$11.60
U-Cap Edge Trim Extrusion. Used to cover (trim) bare edges of wood panels.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together...
E2228/2000 - 1/2" T-CHANNEL DIVIDER EXTRUSION( 6'6 lengths) )
$30.20
T-Channel DividerExtrusion. Used to create partitions, divisions and compartments within cases.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment...
E2226/2000 - T CHANNEL DIVIDER EXTRUSION (6'6")
$30.20
T-Channel DividerExtrusion. Used to create partitions, divisions and compartments withing cases.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment...
3172 - U CHANNEL CAPPING - 3/8"gap - 12dt lengths (cut to 6ft)
$21.40
TO MAKE A CLEAN FINISH TO INTERNAL PARTITIONS
6ft LENGTHS MAY CAUSE AN OVERSIZE SHIPPING CHARGE
REQUEST CUT TO A SHORTER LENTH TO AVOID SUCH CHARGE
3272 - U CHANNEL EXTRUSION 3/8" (12 ft.)
$22.40
U-Cap Edge Trim Extrusion. Used to cover (trim) bare edges of wood panels.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together...
E0870/2000 - LIDMAKER EXTRUSION 1/4" (6'6")
$27.50
Lidmaker Extrusion. This extrusion is used for creating low profile (thin) lids for cases. It has a built-in hybrid tongue & groove that mates with our other stand-alone hybrids to...
E0871/2000 - LIDMAKER EXTRUSION - 3/8"( 6.5 ft. length)
$31.30
45mm x 30mm / 1.77" x 1.18" Lid / Base Extrusion
Board thickness: 10mm / 3/8"
MATES WITH THE FOLLOWING PARTS...
E2367/2000 - 3/8" PANEL JOINER EXTRUSION - (79" length)
$46.00
Panel Extender Extrusion. Used to extend multiple panels for larger-sized cases utilizing 3/8" case walls. It is recommended that other internal bracing be used for structural, and strength,...
E2340/2000 - 3/8" PANEL JOINER EXTRUSION / SPLICE (79" lengths)
$59.90
Panel Extender Extrusion. Used to extend multiple panels for larger-sized cases. It is recommended that other internal bracing be used for structural, and strength, reinforcement as well...