E2340/2000 - 3/8" PANEL JOINER EXTRUSION / SPLICE (79" lengths)
(No reviews yet)
Write a Review
- SKU:
- E2340/2000
- Availability:
- In Stock
- Weight:
- 4.23 LBS
- Width:
- 2.20 (in)
- Height:
- 79.00 (in)
- Depth:
- 0.64 (in)
- Shipping:
- Calculated at Checkout
- Bulk Pricing:
- Buy in bulk and save
Description
Panel Extender Extrusion. Used to extend multiple panels for larger-sized cases. It is recommended that other internal bracing be used for structural, and strength, reinforcement as well.
NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together if they incur harsh handling during the shipment process. This is not abnormal, and is easy to remedy by rubbing the extrusions with some #0000 Fine Grade Steel Wool, cheaply available at any hardware store.
Depending on your case design some rivets may require backing washers. Most rivets will install through the interior leg of the extrusion and therefore require no backing washers.
Material: Mill Finished Aluminum
Additional Information
Specifications Drawings: |
See Parts Pictures Above |
Mates With: |
CNSB1138 Brace |
Related Products
Related Products
E2367/2000 - 3/8" PANEL JOINER EXTRUSION - (79" length)
$46.00
Panel Extender Extrusion. Used to extend multiple panels for larger-sized cases utilizing 3/8" case walls. It is recommended that other internal bracing be used for structural, and strength,...
E2365/2000 - PANEL JOINER - SPLICE EXTRUSION - (79")
$48.20
Panel Extender Extrusion. Used to extend multiple panels for larger-sized cases. It is recommended that other internal bracing be used for structural, and strength, reinforcement as well...
E2367/2000. - FOR 9MM (3/8") PANEL JOINER SPLICE ( 79" long)
$46.00
Panel Extender Extrusion. Used to extend multiple panels for larger-sized cases. It is recommended that other internal bracing be used for structural, and strength, reinforcement as well...
E2265/2000 - 3/8"( 9.6mm) DOUBLE ANGLE CORNER EXTRUSION (79" Lengths)
$28.60
Double Angle Extrusion1.18" x 1.18"Board thickness 3/8"
Material: Aluminium 6063-T5
E0871/2000 - LIDMAKER EXTRUSION - 3/8"( 6.5 ft. length)
$31.30
45mm x 30mm / 1.77" x 1.18" Lid / Base Extrusion
Board thickness: 10mm / 3/8"
MATES WITH THE FOLLOWING PARTS...
E0210/2000 - 3/8 BREAK APART TONGUE AND GROOVE EXTRUSION (79" long )
$37.80
Break-Apart Tongue & Groove Extrusion with gasket groove.Board Thickness: 10.3mm / 3/8"
Fits Most Domestic Laminates.
Material: Aluminium 6063-T5
NOTE: Mill finish unanodized...
E2228/2000 - 1/2" T-CHANNEL DIVIDER EXTRUSION( 6'6 lengths) )
$30.20
T-Channel DividerExtrusion. Used to create partitions, divisions and compartments within cases.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment...
3100 - 3/8" GROOVE EXTRUSION - MALE
$22.80
Heavy Duty Tongue Extrusion. Mates with our 3103 Groove Extrusions to create lid closures.
Quick Clamp FW15/15B
