P1327 - PRE PUNCHED - 3" long hinge
- SKU:
- P1327
- Availability:
- In Stock
- Weight:
- 0.15 LBS
- Width:
- 3.00 (in)
- Height:
- 2.50 (in)
- Depth:
- 0.75 (in)
- Shipping:
- Calculated at Checkout
Description
Hinge For Hinged Lids - This hinge easily creates hinge lids for your case.
Rivets Required For Installation: 6
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
Related Products
Related Products
P81507Z-DOUBLE SWIVEL PIANO HINGE - 72" Long Punched at 3" Centers
$52.50
Eliminates the need for taking two separate pieces of piano hinge and welding or riveting them together.Allows the case lid to rotate 270°, giving full strength to said lid.
P1309P - Steel Piano Hinge - 72" Long x 1.47" Wide Punched At 3" Centers
$22.50
PUNCHED STEEL PIANO HINGE - PUNCHED AT 2" CENTERS
72" LONG X 1.47" WIDE - 0.048" THICK - ZINC PLATED STEEL
P1301P - Steel Piano Hinge - 72" Long x 2" Wide - Punched At 2" Centers
$16.60
PIANO HINGE-2" OPEN - PUNCHED AT 2" CENTERS - 0.048" ZINC PLATED STEEL
P1327K - HINGE - black.
$4.40
Hinge For Hinged Lids - This hinge easily creates hinge lids for your caseRivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing washers...
1965 - PIANO HINGE 2"/ continous steel - punched - 6ft lengths
$17.90
Steel Continuous Hinge
Open Hinge
1.83m / 72" LengthPunched 50.8mm / 2" Centre
3153/12 -ANGLE CORNER EXTRUSION -PRE PUNCHED- 13/16" (12ft.)
$35.90
Pre-punched Heavy Duty Single Angle Corner Extrusion. Rivet holes are pre-punched every 3". Alternative to double angle corner extrusions.TH
3158 - ANGLE CORNER EXTRUSION-PRE PUNCHED 1 1/2" X 1 1/2" (12ft.)
$37.20
Pre-punched Heavy Duty Single Angle Corner Extrusion. Rivet holes are pre-punched every 3". Alternative to double angle corner extrusions.THIS ITEM SELLS IN 12 FT. STICKS and must be CUT in...
1903 - 3" STRAP HINGE WITH C/S HOLES
$1.75
Strap Hinges are used for creating hinged panels for constructing and accessing inside of the crate, as well as diassembling crates for flat storage.
D0604K - CONNECTER DISH - punched for neutrik D series
$4.90
Recessed Pre-punched Connector Dish - pre-punched for Nuetrik D-series connectors (XLR, Speaon, RK45, etc.).Rivets Required For Installation: 4THIS ITEM REQUIRES A CUTOUT IN THE CASE WALL...