1020 - BALL CORNER - MEDIUM - SMALL BALL (as an alternative use part # C1080)
- SKU:
- 1020
- Availability:
- In Stock
- Weight:
- 0.13 LBS
- Width:
- 2.09 (in)
- Height:
- 1.80 (in)
- Depth:
- 2.09 (in)
- Shipping:
- Calculated at Checkout
Description
Steel Ball Corner - Small Ball. Smaller ball profile. Covers the joint and seams between the extrusions at all corners.
Rivets Required For Installation: 3
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
All Cases
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions
Material: 1.2mm/ 0.047" Steel
Related Products
Related Products
C1081Z - MEDIUM SIZE BALL CORNER - (matches with brace / ball corner)
$1.70
Steel Ball Corner - May be used as a stand-alone corner option, or in conjunction as the bottm corner with its sister Brace Ball Corner C1082Z to complete the 4 bottom corners on...
C1353Z - BALL CORNER - medium stacking
$2.10
Medium Stackable Steel Ball Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case...
C1079Z-MEDIUM DUTY BALL CORNER
$1.60
MEDIUM DUTY BALL CORNER WHERE THE STRENGTH OF A BALL CORNER IS NEEDED ON A MEDIM SIZED CASE
C1082Z - BRACE BALL CORNER - medium
$1.70
Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids. Covers the joint and seams between the extrusions at all corners, as well as...
C1344Z - SMALL OFFSET BALL CORNER
$1.50
SMALL OFFSET BALL CORNER FOR COMPACT CASE USE - COMPATIBLE WITH E0815 EXTRUSIONS
C1080Z - MEDIUM DUTY BALL CORNER (1/32" inside radius)
$1.60
INSIDE RADIUS OF 1/32" - A STRONG BALL CORNER WITH A MEDIUM SIZE
1018 - TRIANGULAR BALL CORNER
$2.10
Steel Triangular Ball Corner. Smaller profile, but still heavy duty. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
1002 - BALL CORNER - large
$2.00
Heavy Duty Steel Ball Corner. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Covers the joint and seams between the extrusions at all corners...