LATCHES
Close Your Cases With Our Heavy Duty Latches For Any Application. From the largest of cases to the smallest, we have a latch to fulfill your needs. All latches are made from the highest quality materials, utilizing high-endurance zinc protective finishes, unless noted otherwise.
Finish: Zinc Finish (unless another option is listed)
REMEMBER, we wanted to keep the DIY Road Cases® Store simple, and make your decision-making even easier. In this section we list only the most common latches requested, and purchased, by our thousands of customers. However, anything you could ever need, for any type of case, is available. If you don't see it here, please see our I Really Need That!™ Parts Section. If you don't see it there, just contact us and we'll get you what you need!
-
L0340SS - PULL ACTION LATCH CLAMP
$8.80STAINLESS STEEL - HIGH QUALITY - NOT LIKE CARBON STEEL Adjustable Pull-Action Latch Clamp for quick closure of crates, enclosures, cases, rack covers and lids.- Thumb-control lever for single-handed operation.- Threaded hook for easy adjustment.-...$8.80 -
L925/529Z - LARGE TWIST LATCH in "Short" 6.25" Dish (With Plain Flanges)
$9.80LARGE TWIST LATCH IN "SHORT" 6.25" DISH FOR CASES WITH LOWER LID APPLICATIONS - PLAIN FLANGES$9.80 -
L925/579 - LARGE LATCH in "Short" dish 6.25" With Offset Flanges 1 1/16" Offsets
$9.90LARGE TWIST LATCH IN SHORTER DISH - FOR CASES WITH LOWER LID DIMENSIONS - HAS 1 1/16" OFFSETS ON FLANGE TO SIT OVER EXTRUSIONS$9.90 -
L2572 - SLAM LATCH - Use With L2572CP & E0490 Extrusion
$9.40USE WITH L2572-CP CATCH PLATE AND E0490 EXTRUSION$9.40 -
2572-CP - CATCH PLATE - For L2572 Slam Latch (Suits Extrusion E0490)
$1.90CATCH PLATE FOR SLAM LATCH SYSTEM - PART # L2572 AND EXTRUSION E0490$1.90 -
L907/915K - MEDIUM RECESSED LATCH - Black Powder Coated 1/16" Offset
$11.70MEDIUM RECESSED LATCH - STRONG BLACK POWDER COAT 1 1/16" OFFSETS TO SIT OVER EXTRUSIONS$11.70 -
L1094K-HD - DRAW LATCH - BLACK Locking (note - picture is nickel-product is black)
$6.40This is a standard draw latch. This is a two-piece surface-mount latch and is key-lockable BLACK coatedRivets Required For Installation: 5 OUR RIVETS DO NOT FIT THESE HOLES - SMALLER DIAMETER RIVETS MUST BE PURCHASED AT YOUR LOCAL...$6.40 -
L0737/57-OVERSPANNING LATCH
$10.90Valance Spanning Overlatch in 10mm / 3/8" Offset Dish.Catch Plate (Not included) L0965/CP or L0747/CPAir tight gasket L0737GBackpate L07 This latch "spans" the tongue & groove closure valance and is ONLY for use...$10.90 -
$0.70
-
2017 - SURFACE MOUNT TWIST LATCH protector dish plate with ridges
$3.50Surface mount twist latch protector plate with protective ridges.For use with 1/2" plywood.Works with large twist latches 7536, 7538 and 7568.Also available with Latch Pre-Riveted Latch 2017-7568$3.50 -
2011 LARGE SURFACE MOUNT CATCH PLATE For L0935 padlocking catch
$1.70Large Surface Mount Padlockable Catch Plate Use with padlocking twist latch #7589 or other similar applications$1.70 -
L0914K - MINI BLACK SURFACE MOUNT LATCH-(spring loaded)
$6.80MINI BLACK POWDER COATED SURFACE LATCH - SPRING LOADED$6.80 -
8102 - OVERSPANNING LATCH
$8.30Securely close your case with a valance spanning latch mounted in a one-part dish. This latch has a blade action which allows it to be mounted below the edge extrusion, eliminating the need to cut through the extrusion. When unlocked, the blade springs...$8.30 -
L0965/CP - CATCH PLATE -for overspanning latches
$0.90CATCH PLATE FOR L0965 OVERSPANNING LATCH SERIES$0.90 -
L0747/CP-CATCH PLATE-for overspanning latches
$1.80CATCH PLATE FOR OVERSPANNING LATCHES FOR L0747 & L0737 SERIES LATCHES$1.80 -
L978/928 - MEDIUM RECESSED LATCH IN DISH-with 7/8" offsets
$8.60MEDIUM MOL STYLE LATCH IN DISH WITH 7/8" OFFSETS FOR EXTRUSIONS$8.60 -
$0.60
-
L2472 - QUICK LID LATCH - locking
$12.90Quick Lid™ Latch - This special internal finger-operated latch is used as part of our Quick Lid™ System. This particular finger-operated latch installs on the inside of the Quick Lid™ Panel. A small finger access...$12.90 -
L787SM - ACCESS DOOR SURFACE LATCH PLATE - rotary cam
$9.30This is a Rotary Cam style twist latch. This thin-profile two-piece surface latch is perfect for access doors (see graphic below)Rivets Required For Installation: 10Rivets may require backing washers depending on your case design and method of...$9.30 -
4956 - SURFACE LATCH PLATE with protectors and offsets
$8.90This is a standard heavy-duty twist latch. This is a two-piece full surface dish assembly surface latch with built-in latch protectors and offsets to accommodate extrusions.Rivets Required For Installation: 14Rivets may require backing washers...$8.90