1965 - PIANO HINGE 2"/ continous steel - punched - 6ft lengths
(No reviews yet)
Write a Review
- SKU:
- 1965
- Availability:
- In Stock
- Weight:
- 2.50 LBS
- Width:
- 1.50 (in)
- Height:
- 72.00 (in)
- Depth:
- 0.40 (in)
- Shipping:
- Calculated at Checkout
Description
Steel Continuous Hinge
Open Hinge
1.83m / 72" Length
Punched 50.8mm / 2" Centre
This 2"-when-open hinge provided for full-length, side-to-side, coverage for attaching your lid to the body of your case for smoothness of operation and superior strength. -
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
Additional Information
Specifications Drawings: |
See Parts Pictures Above |
Open Dimension: |
1 1/2 inches |
Length: |
6 ft. |
Related Products
Related Products
P1301P - Steel Piano Hinge - 72" Long x 2" Wide - Punched At 2" Centers
$16.60
PIANO HINGE-2" OPEN - PUNCHED AT 2" CENTERS - 0.048" ZINC PLATED STEEL
P1309P - Steel Piano Hinge - 72" Long x 1.47" Wide Punched At 3" Centers
$22.50
PUNCHED STEEL PIANO HINGE - PUNCHED AT 2" CENTERS
72" LONG X 1.47" WIDE - 0.048" THICK - ZINC PLATED STEEL
1923 - PIANO HINGE - 1.5" / continuous steel
$15.40
Steel Continuous Hinge (AKA Piano Hinge) - This 1.5"-when-open hinge provides for full-length, side-to-side, coverage for attaching your lid to the body of your case for smoothness of...
P81507Z-DOUBLE SWIVEL PIANO HINGE - 72" Long Punched at 3" Centers
$52.50
Eliminates the need for taking two separate pieces of piano hinge and welding or riveting them together.Allows the case lid to rotate 270°, giving full strength to said lid.
P1327 - PRE PUNCHED - 3" long hinge
$4.30
Hinge For Hinged Lids - This hinge easily creates hinge lids for your case. Rivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing...
D0607K-RECESSED STEEL DISH-punched for 2 @ 1/4" jacks
$4.90
RECESSED STEEL DISH-PUNCHED FOR 2 @ 1/4" JACKS. BLACK POWDER COATED
D0602K-RECESSED STEEL DISH-punched for 2 Neutrik D series +2 @ 1/4" jacks
$6.40
RECESSED STEEL POWDER COATED DISH - PUNCHED FOR 2 NEUTRIK D SERIES + 2 @ 1/4" JACKS
D0944K-RECESSED DISH-STEEL-PUNCHED FOR 1 @ 1/4" JACK
$4.90
RECESSED BLACK STEEL POWDER COATED DISH. PUNCHED FOR 1 @ 1/4" JACK
3172 - U CHANNEL CAPPING - 3/8"gap - 12dt lengths (cut to 6ft)
$21.40
TO MAKE A CLEAN FINISH TO INTERNAL PARTITIONS
6ft LENGTHS MAY CAUSE AN OVERSIZE SHIPPING CHARGE
REQUEST CUT TO A SHORTER LENTH TO AVOID SUCH CHARGE