3017 - 1/4" GROOVE EXTRUSION FOR CLOSURES 12FT LENGTHS
(No reviews yet)
Write a Review
- SKU:
- 3017
- Weight:
- 2.23 LBS
- Width:
- 1.19 (in)
- Height:
- 144.00 (in)
- Depth:
- 1.19 (in)
- Shipping:
- Calculated at Checkout
Description
1/4" Groove Extrusion mates with 3016 Tongue Extrusion.
Board thickness: 7mm / 1/4"
Related Products
Related Products
3032 - 1/2" GROOVE EXTRUSION - 12FT LENGTHS - (Must read description below)
$24.00
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...
3016 - 1/4" MALE EXTR FOR CLOSURES - 12FT LENGTHS
$27.20
1/4" Tongue Extrusion mates with 3017 Groove Extrusion.Board thickness: 7mm / 1/4"
3021/23 - 1/4" BREAK APART TONGUE AND GROOVE EXTRUSION (12 ft)
$44.00
Break-Apart Tongue & Groove ExtrusionBoard Thickness: 6.73mm / 1/4"Fits Most Import(Luan) Laminates.
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU...
3158 - ANGLE CORNER EXTRUSION-PRE PUNCHED 1 1/2" X 1 1/2" (12ft.)
$37.20
Pre-punched Heavy Duty Single Angle Corner Extrusion. Rivet holes are pre-punched every 3". Alternative to double angle corner extrusions.THIS ITEM SELLS IN 12 FT. STICKS and must be CUT in...
3100 - 3/8" GROOVE EXTRUSION - MALE
$22.80
Heavy Duty Tongue Extrusion. Mates with our 3103 Groove Extrusions to create lid closures.
Quick Clamp FW15/15B
3153/12 -ANGLE CORNER EXTRUSION -PRE PUNCHED- 13/16" (12ft.)
$35.90
Pre-punched Heavy Duty Single Angle Corner Extrusion. Rivet holes are pre-punched every 3". Alternative to double angle corner extrusions.TH
E2390 - DOUBLE ANGLE CORNER EXTRUSION - 1/4" (0.30" GAP) (6.5 ft LENGTHS)
$24.80
Double Angle Corner Extrusion. Double channels not only make assembly faster and easier, but provide maximum strength and integrity for case framework. See our cutting tips video...
3103 - 3/8" GROOVE EXTRUSION (12 ft.)
$26.60
Heavy Duty Tongue Extrusion. Mates with our 3100 Tongue Extrusions to create lid closures.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from...
3030/32 - 1/2 " BREAK APART TONGUE & GROOVE EXTRUSION (12 ft)
$56.00
Break-Apart Tongue & Groove ExtrusionBoard Thickness: 14.5mm / 9/16"Fits Most Domestic Laminates.
Material: Aluminium 6063-T5
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT In...