3030 1/2" TONGUE EXTRUSION (12 ft.)
- SKU:
- 3030
- Availability:
- In Stock
- Weight:
- 1.55 LBS
- Width:
- 1.19 (in)
- Height:
- 144.00 (in)
- Depth:
- 1.19 (in)
- Shipping:
- Calculated at Checkout
Description
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT SHIPPING
Fits Most Domestic Laminates.
Heavy Duty Tongue Extrusion. Mates with our 3032 Groove Extrusions to create lid closures.
NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together if they incur harsh handling during the shipment process. This is not abnormal, and is easy to remedy by rubbing the extrusions with some #0000 Fine Grade Steel Wool, cheaply available at any hardware store.
Rivets Required For Installation: Varies depending on length of section used, as well as associated parts that may be riveted through it.
Depending on your case design some rivets may require backing washers. Most rivets will install through the interior leg of the extrusion and therefore require no backing washers.
Related Products
Related Products
3030/32 - 1/2 " BREAK APART TONGUE & GROOVE EXTRUSION (12 ft)
3021/23 - 1/4" BREAK APART TONGUE AND GROOVE EXTRUSION (12 ft)
3070 - 1/2" DOUBLE ANGLE EXTRUSION (12 ft.)
3270 - U CHANNEL 1/2" GAP EXTRUSION - (12 ft.)
3023 - 1/2" DOUBLE ANGLE CORNER EXTRUSION (12 ft.)
3020 - 1/4" EXTRUSION - MALE (12 ft)
3022 - 1/4" FEMALE EXTRUSION (12 ft.)
3024 - 1/2" EXTRUSION -MALE for use with quick clamps (12 ft.)
