3100 - 3/8" GROOVE EXTRUSION - MALE
- SKU:
- 3100
- Availability:
- In Stock
- Weight:
- 1.66 LBS
- Width:
- 1.19 (in)
- Height:
- 144.00 (in)
- Depth:
- 1.19 (in)
- Shipping:
- Calculated at Checkout
Description
Heavy Duty Tongue Extrusion. Mates with our 3103 Groove Extrusions to create lid closures.
Quick Clamp FW15/15B
NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together if they incur harsh handling during the shipment process. This is not abnormal, and is easy to remedy by rubbing the extrusions with some #0000 Fine Grade Steel Wool, cheaply available at any hardware store.
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT SHIPPING.
Rivets Required For Installation: Varies depending on length of section used, as well as associated parts that may be riveted through it.
Depending on your case design some rivets may require backing washers. Most rivets will install through the interior leg of the extrusion and therefore require no backing washers.
_____________________________________________________________________________
Material: Mill Finished Aluminum
Related Products
Related Products
3104 3/8" GROOVE EXTRUSION MALE - (12 ft.)
3103 - 3/8" GROOVE EXTRUSION (12 ft.)
3105 3/8" Groove Extrusion FeMale - (12 ft.)
3100/03 - 3/8 BREAK APART TONGUE AND GROOVE( 12 ft.)
E0210/2000 - 3/8 BREAK APART TONGUE AND GROOVE EXTRUSION (79" long )
3017 - 1/4" GROOVE EXTRUSION FOR CLOSURES 12FT LENGTHS
3272 - U CHANNEL EXTRUSION 3/8" (12 ft.)
3109 - 3/8" DOUBLE ANGLE EXTRUSION (12 ft.)
