3170 - U CAPPING PIECE - 1/2" GAP - (12ft.)
- SKU:
- 3170
- Weight:
- 1.96 LBS
- Width:
- 0.80 (in)
- Height:
- 0.60 (in)
- Depth:
- 144.00 (in)
- Shipping:
- Calculated at Checkout
Description
PRICED AS A 12FT PIECE
TO MAKE A CLEAN FINISH TO INTERNAL PARTITIONS
6ft LENGTHS MAY CAUSE AN OVERSIZE SHIPPING CHARGE
REQUEST CUT TO A SHORTER LENTH TO AVOID SUCH CHARGE
Related Products
Related Products
3270 - U CHANNEL 1/2" GAP EXTRUSION - (12 ft.)
$22.90
U-Channel 12 foot CUT in half making it 72 inches for shippingBoard thickness: 12.7mm / 1/2"TO BE USED WITH RAW PLYWOOD
3158 - ANGLE CORNER EXTRUSION-PRE PUNCHED 1 1/2" X 1 1/2" (12ft.)
$37.20
Pre-punched Heavy Duty Single Angle Corner Extrusion. Rivet holes are pre-punched every 3". Alternative to double angle corner extrusions.THIS ITEM SELLS IN 12 FT. STICKS and must be CUT in...
3172 - U CHANNEL CAPPING - 3/8"gap - 12dt lengths (cut to 6ft)
$21.40
TO MAKE A CLEAN FINISH TO INTERNAL PARTITIONS
6ft LENGTHS MAY CAUSE AN OVERSIZE SHIPPING CHARGE
REQUEST CUT TO A SHORTER LENTH TO AVOID SUCH CHARGE
3032 - 1/2" GROOVE EXTRUSION - 12FT LENGTHS - (Must read description below)
$24.00
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...
3016 - 1/4" MALE EXTR FOR CLOSURES - 12FT LENGTHS
$27.20
1/4" Tongue Extrusion mates with 3017 Groove Extrusion.Board thickness: 7mm / 1/4"
3017 - 1/4" GROOVE EXTRUSION FOR CLOSURES 12FT LENGTHS
$29.80
1/4" Groove Extrusion mates with 3016 Tongue Extrusion.Board thickness: 7mm / 1/4"
E2213/2000 U CHANNEL - 1/2" (6 '6")
$12.40
U-Cap Edge Trim Extrusion. Used to cover (trim) bare edges of wood panels. NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing...
E2390 - DOUBLE ANGLE CORNER EXTRUSION - 1/4" (0.30" GAP) (6.5 ft LENGTHS)
$24.80
Double Angle Corner Extrusion. Double channels not only make assembly faster and easier, but provide maximum strength and integrity for case framework. See our cutting tips video...
3153/12 -ANGLE CORNER EXTRUSION -PRE PUNCHED- 13/16" (12ft.)
$35.90
Pre-punched Heavy Duty Single Angle Corner Extrusion. Rivet holes are pre-punched every 3". Alternative to double angle corner extrusions.TH