3270 - U CHANNEL 1/2" GAP EXTRUSION - (12 ft.)
- SKU:
- 3270
- Weight:
- 0.98 LBS
- Width:
- 0.54 (in)
- Height:
- 0.80 (in)
- Depth:
- 72.00 (in)
- Shipping:
- Calculated at Checkout
Description
U-Channel 12 foot CUT in half making it 72 inches for shipping
Board thickness: 12.7mm / 1/2"
TO BE USED WITH RAW PLYWOOD
Material: Aluminium 6063-T5
Related Products
Related Products
3272 - U CHANNEL EXTRUSION 3/8" (12 ft.)
$22.40
U-Cap Edge Trim Extrusion. Used to cover (trim) bare edges of wood panels.NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together...
3030 1/2" TONGUE EXTRUSION (12 ft.)
$22.70
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...
3070 - 1/2" DOUBLE ANGLE EXTRUSION (12 ft.)
$46.60
Price is for a 12ft length.
6FT lengths may incur a UPS oversize shipping cost - maybe request cut to 3ft lengths
3023 - 1/2" DOUBLE ANGLE CORNER EXTRUSION (12 ft.)
$41.10
Double Angle Extrusion· 35mm x 35mm / 1.38" x 1.38"· Board thickness : 13.5mm / 9/16"
Material: Aluminium 6063-T5
Heavy Duty Double Angle Corner Extrusion
3020 - 1/4" EXTRUSION - MALE (12 ft)
$22.50
Heavy Duty Tongue Extrusion. Mates with our 3022 Groove Extrusions to create lid closures.NOTE: Mill finish unanodized ext
3022 - 1/4" FEMALE EXTRUSION (12 ft.)
$24.40
Heavy Duty Groove Extrusion. Mates with our 3020 Tongue Extrusions to create lid closures.NOTE: Mill finish unanodized ext
3024 - 1/2" EXTRUSION -MALE for use with quick clamps (12 ft.)
$35.50
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...
3025 - 1/2" EXTRUSION FEMALE for use with quick clamps (12 ft.)
$41.80
THIS ITEM SELLS IN 12 FT. STICKS & MUST SHIP CUT FOR GROUND SHIPPING. IF YOU REQUIRE THE STICKS UNCUT FOR YOUR PROJECT, ADDITIONAL SUBSTANTIAL COST WILL BE REQUIRED FOR FREIGHT...
E2390 - DOUBLE ANGLE CORNER EXTRUSION - 1/4" (0.30" GAP) (6.5 ft LENGTHS)
$24.80
Double Angle Corner Extrusion. Double channels not only make assembly faster and easier, but provide maximum strength and integrity for case framework. See our cutting tips video...