C1081Z - MEDIUM SIZE BALL CORNER - (matches with brace / ball corner)
(No reviews yet)
Write a Review
- SKU:
- C1081Z
- Availability:
- In Stock
- Weight:
- 0.11 LBS
- Width:
- 1.95 (in)
- Height:
- 1.56 (in)
- Depth:
- 1.95 (in)
- Shipping:
- Calculated at Checkout
Description
Steel Ball Corner - May be used as a stand-alone corner option, or in conjunction as the bottm corner with its sister Brace Ball Corner C1082Z to complete the 4 bottom corners on such cases.
Rivets Required For Installation: 3
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
Bottom Corners on Lidmaker Cases
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions
- Matching Corner For Lidmaker Cases Using CNSC1082 For The Top 4 Corners Of The Lidmaker
Material: 1.2mm/ 0.047" Steel
Additional Information
Specifications Drawings: |
See Parts Pictures Above |
Mates With: |
CNSE0870 Lid-maker Extrusion |
Related Products
Related Products
C1082Z - BRACE BALL CORNER - medium
$1.70
Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids. Covers the joint and seams between the extrusions at all corners, as well as...
C1358Z - BRACE BALL CORNER
$2.10
Brace Ball Corner with 30mm / 1.18" Offset
Mates with Extrusions: E2540,
C1373 - BRACE BALL CORNER - large
$2.70
Steel Brace Ball Corner - Acts as a ball corner and corner brace in one. Covers the joint and seams between the extrusions at the corners, as well as acting as a corner brace at the...
B1121 - CORNER BRACE - medium
$0.80
Heavy Duty Ribbed Steel Corner Brace - Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Provides a clean fit with extrusions. Covers gaps and...
C1079Z-MEDIUM DUTY BALL CORNER
$1.60
MEDIUM DUTY BALL CORNER WHERE THE STRENGTH OF A BALL CORNER IS NEEDED ON A MEDIM SIZED CASE