C 1850K - FLAT CORNER - large - black *** OUT OF STOCK AS AT 08/15/22 ****
(No reviews yet)
Write a Review
- SKU:
- C1850K
- Availability:
- In Stock
- Weight:
- 0.16 LBS
- Width:
- 2.25 (in)
- Height:
- 2.00 (in)
- Depth:
- 2.25 (in)
Description
Large Medium-duty Steel Flat Corner In Black Finish - Smaller profile. Covers the joint and seams between the extrusions at all corners.
Rivets Required For Installation: 6 OUR RIVETS DO NOT FIT THESE HOLES - EITHER DRILL THE HOLES OUT WITH YOUR 3/16" DRILL BIT OR SMALLER RIVETS MUST BE PURCHASED AT YOUR LOCAL HARDWARE STORE.
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
All Cases
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions
Material: 1.5mm/ 0.059" Steel
Related Products
Related Products
C1850Z - FLAT CORNER - LARGE
$2.10
Large Medium-duty Steel Flat Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6 OUR...
10231 - FLAT CORNER LARGE - 6 hole
$1.40
Heavy Duty Flat Corner6 Mounting HolesInternal Radius: 3mm / 1/8"
Material:
C1860Z - FLAT CORNER - LARGE - female - stacking
$2.10
Large Steel Flat Corner With Female Stacking Dimple. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
C1855Z - FLAT CORNER LARGE - male - stacking
$2.10
Large Steel Flat Corner With Male Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6...
C1351-STACK - LARGE BALL CORNER with new interlocking cut outs
$2.10
Large Ball Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.Also available C7082-STACK medium flat corner.1.18" Offset3 Mounting Holes
C1851/30 - LARGE FLAT CORNER with 1.18" offsets / 0.08 radius
$2.80
6 Hole Flat Corner with 30mm / 1.18" Offset6 Mounting HolesInternal Radius: 2mm / 0.08"
1002 - BALL CORNER - large
$2.00
Heavy Duty Steel Ball Corner. Mates with all of our extrusions for 1/4", 3/8", and 1/2" wall panel thicknesses. Covers the joint and seams between the extrusions at all corners...
1059 - TRIANGULAR FLAT CORNER
$1.60
Steel Triangular Ball Corner. Smaller profile, but still heavy duty. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
1060 - FLAT CORNER - small
$0.80
Small Steel Flat Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design...