C1353Z - BALL CORNER - medium stacking
- SKU:
- C1353Z
- Availability:
- In Stock
- Weight:
- 0.15 LBS
- Width:
- 2.28 (in)
- Height:
- 2.00 (in)
- Depth:
- 2.28 (in)
- Shipping:
- Calculated at Checkout
Description
Medium Stackable Steel Ball Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.
Rivets Required For Installation: 3
Depending on your case design and dimensions, some rivets may require backing washers. Some rivets will install through the aluminum extrusions and therefore require no backing washers.
THIS ITEM REQUIRES NO CUTOUTS IN THE CASE WALL TO INSTALL.
RECOMMENDED USES:
All Cases
MINIMUM RECOMMENDED CASE DIMENSIONS:
N/A
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Extrusions
Finish: Zinc Finish (unless another option is listed)
Material: 1.5mm/ 0.059" Steel
Related Products
Related Products
C1935Z - FLAT CORNER - MEDIUM - stacking - female
$2.10
Medium Steel Flat Corner With Female Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
C1150Z - FLAT CORNER - MEDIUM - male stacking
$1.70
Medium Steel Flat Corner With Male Stacking Foot. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation:...
C1081Z - MEDIUM SIZE BALL CORNER - (matches with brace / ball corner)
$1.70
Steel Ball Corner - May be used as a stand-alone corner option, or in conjunction as the bottm corner with its sister Brace Ball Corner C1082Z to complete the 4 bottom corners on...
C1079Z-MEDIUM DUTY BALL CORNER
$1.60
MEDIUM DUTY BALL CORNER WHERE THE STRENGTH OF A BALL CORNER IS NEEDED ON A MEDIM SIZED CASE
C1082Z - BRACE BALL CORNER - medium
$1.70
Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids. Covers the joint and seams between the extrusions at all corners, as well as...
C1351-STACK - LARGE BALL CORNER with new interlocking cut outs
$2.10
Large Ball Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.Also available C7082-STACK medium flat corner.1.18" Offset3 Mounting Holes
1020 - BALL CORNER - MEDIUM - SMALL BALL (as an alternative use part # C1080)
$1.80
Steel Ball Corner - Small Ball. Smaller ball profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case...
C1080Z - MEDIUM DUTY BALL CORNER (1/32" inside radius)
$1.60
INSIDE RADIUS OF 1/32" - A STRONG BALL CORNER WITH A MEDIUM SIZE
C1539 - LARGE RIBBED PLASTIC STACKING CORNER
$1.10
Large Ribbed 2-Leg Plastic Stacking Corner - Flush mounts to wodden cabinet corners, or over top of carpet-covered cabinets.Screws Required For Installation: 4 (not included)Materi