Special Corners
Heavy Duty to Medium duty corners special applications. If you are looking for different style corners for a specific application, then these will do the job. All corners are made from the highest quality steel with high-endurance protective finishes.
Finish: Zinc Finish (unless another option is listed)
* WE DO NOT RECOMMEND THAT YOU PRE-DRILL OR PRE-CUT ANY HOLES, FITTINGS, OR FIXTURES UNTIL YOU HAVE YOUR PARTS IN HAND IN ORDER TO PREVENT ANY MISALIGNMENT, SIZING, OR DESIGN ISSUES.
-
C0675/30 - 2 LEG WRAP AROUND CORNER for slam lid systems
$2.20Works with Slam Latch L2470, Extrusion E0490 and Hook P2472$2.20 -
1018 - TRIANGULAR BALL CORNER
$2.10Steel Triangular Ball Corner. Smaller profile, but still heavy duty. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6Depending on your case design and dimensions, some rivets...$2.10 -
1059 - TRIANGULAR FLAT CORNER
$1.60Steel Triangular Ball Corner. Smaller profile, but still heavy duty. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 6Depending on your case design and dimensions, some rivets...$1.60 -
C1349Z - BRACE / BALL CORNER - heavy duty
$2.00Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids, or to be used with lid-maker extrusions. Covers the joint and seams between the extrusions at all corners, as well as covering...$2.00 -
C1082Z - BRACE BALL CORNER - medium
$1.70Steel Brace Ball Corner. Heavy duty ball corner with corner brace built-in for thin profile lids. Covers the joint and seams between the extrusions at all corners, as well as covering hybrid tongue & groove extrusion without...$1.70 -
C1081Z - MEDIUM SIZE BALL CORNER - (matches with brace / ball corner)
$1.70Steel Ball Corner - May be used as a stand-alone corner option, or in conjunction as the bottm corner with its sister Brace Ball Corner C1082Z to complete the 4 bottom corners on such cases.Rivets Required For Installation: 3Depending...$1.70 -
C0679 - TRIANGULAR REINFORCED CORNER - flat
$1.90Steel Triangular Ball Corner. Smaller profile. Covers the joint and seams between the extrusions at all corners.Rivets Required For Installation: 3Depending on your case design and dimensions, some rivets may require backing...$1.90 -
C1373 - BRACE BALL CORNER - large
$2.70Steel Brace Ball Corner - Acts as a ball corner and corner brace in one. Covers the joint and seams between the extrusions at the corners, as well as acting as a corner brace at the junction where the Hybrid Tongue & Groove Extrusion...$2.70