Recessed Latches
Heavy duty to light duty recessed twist latches for any application. We recommend recessed latches with offsets for extrusions when possible. This provides for a flush, and clean looking, installation. All latches are made from the highest quality materials, utilizing high endurance protective finishes. The draw strength of our twist latches are the strongest in the industry.
Finish: Zinc Finish (unless another option is listed)
* WE DO NOT RECOMMEND THAT YOU PRE-DRILL OR PRE-CUT ANY HOLES, FITTINGS, OR FIXTURES UNTIL YOU HAVE YOUR PARTS IN HAND IN ORDER TO PREVENT ANY MISALIGNMENT, SIZING, OR DESIGN ISSUES.
-
L0350 - BLACK POP UP LATCH - POWDER COATED
$18.50BLACK LEVER LATCH WITH POP UP MECHANISM - BLACK POWDER COAT - DIE CAST ALUMINUM$18.50 -
$22.50 -
$19.10 -
L944/578MOL3-LARGE TWIST LATCH IN RECESSED DISH-7/8" OFFSETS FOR EXTRUSIONS
$11.40Standard Heavy-duty Recessed Twist Latch For Use With Full-length Extrusions. This is a two-piece dish assembly and requires extra cuts to the tongue & groove extrusions for installation and is for use with our extrusions. Rivets...$11.40 -
L907/928/07 - MEDIUM SIZE LATCH IN SHALLOW (1/4" DEEP) DISH
$8.80MEDIUM SIZE LATCH SHALLOW DISH - GREAT ON APPLICATIONS FOR THIN WALL (1/4" ) CASES USE WITH BACKPLATE L0906$8.80 -
L925/529Z - LARGE TWIST LATCH in "Short" 6.25" Dish (With Plain Flanges)
$11.40LARGE TWIST LATCH IN "SHORT" 6.25" DISH FOR CASES WITH LOWER LID APPLICATIONS - PLAIN FLANGES$11.40 -
L925/579 - LARGE LATCH in "Short" dish 6.25" With Offset Flanges 1 1/16" Offsets
$11.40LARGE TWIST LATCH IN SHORTER DISH - FOR CASES WITH LOWER LID DIMENSIONS - HAS 1 1/16" OFFSETS ON FLANGE TO SIT OVER EXTRUSIONS$11.40 -
L2572 - SLAM LATCH - Use With L2572CP & E0490 Extrusion
$10.90USE WITH L2572-CP CATCH PLATE AND E0490 EXTRUSION$10.90 -
2572-CP - CATCH PLATE - For L2572 Slam Latch (Suits Extrusion E0490)
$2.60CATCH PLATE FOR SLAM LATCH SYSTEM - PART # L2572 AND EXTRUSION E0490$2.60 -
L907/915K - MEDIUM RECESSED LATCH - Black Powder Coated 1/16" Offset
$11.70MEDIUM RECESSED LATCH - STRONG BLACK POWDER COAT 1 1/16" OFFSETS TO SIT OVER EXTRUSIONS$11.70 -
L0737/57-OVERSPANNING LATCH
$11.60Valance Spanning Overlatch in 10mm / 3/8" Offset Dish.Catch Plate (Not included) L0965/CP or L0747/CPAir tight gasket L0737GBackpate L07 This latch "spans" the tongue & groove closure valance and is ONLY for use...$11.60 -
L907/915-2 - MEDIUM RECESSED LATCH - offsets with 2 padlocking brackets
$9.70Type a desc Rivets Required For Installation: 10Six of the rivets require backing washers, or a backplate, as those rivets will install through bare wood internally. Two of the side rivets install through the aluminum tongue & groove,...$9.70 -
8102 - OVERSPANNING LATCH
$8.30Securely close your case with a valance spanning latch mounted in a one-part dish. This latch has a blade action which allows it to be mounted below the edge extrusion, eliminating the need to cut through the extrusion. When unlocked, the blade springs...$8.30 -
L978/928 - MEDIUM RECESSED LATCH IN DISH-with 7/8" offsets
$8.60MEDIUM MOL STYLE LATCH IN DISH WITH 7/8" OFFSETS FOR EXTRUSIONS$8.60 -
L787SM - ACCESS DOOR SURFACE LATCH PLATE - rotary cam
$10.20This is a Rotary Cam style twist latch. This thin-profile two-piece surface latch is perfect for access doors (see graphic below)Rivets Required For Installation: 10Rivets may require backing washers depending on your case design and method of...$10.20 -
L935/527PD - LARGE PADLOCKING LATCH IN DISH - 1 1/16" offsets
$16.90This is a recessed heavy-duty twist latch with brackets for inserting a padlock with offsets for extrusions. This is a two-piece dish assembly and requires extra cuts to the tongue & groove, or hybrid, extrusions for installation. This...$16.90 -
L1066Z - SLAM LOCK MEDIUM RANGE - recessed
$14.10medium Slam Lock Latch - This may be used to create removable panels instead of creating a full-blown lid. Great for creating access panels. This particular latch installs on the exterior of the panel via a cutout required in the case wall to allow...$14.10 -
L944/527MOL3 - LARGE RECESSED LATCH IN DISH - 1 1/16" OFFSETS
$11.40This is a standard heavy-duty twist latch. This is a two-piece dish assembly and requires extra cuts to the tongue & groove, or hybrid, extrusions for installation. Both recessed dishes have offsets to accommodate the tongue &...$11.40 -
L905/915Z - LATCH MEDIUM - RECESSED - no offsets - flip down key
$8.50This is a standard Medium -duty twist latch. This is a two-piece dish assembly and requires extra cuts to the tongue & groove, or hybrid, extrusions for installation. These dishes have NO offsets to accommodate the tongue & groove,...$8.50 -
L905/928 - LATCH AUTO CLOSE -zinc brite - medium size - recessed
$8.40This is a standard heavy-duty twist latch. This is a two-piece dish assembly and requires extra cuts to the tongue & groove, or hybrid, extrusions for installation. These dishes have NO offsets to accommodate the tongue & groove,...$8.40