E0775/2000 - SINGLE ANGLE EXTRUSION ( 79") Note need to cut in half, otherwise oversize shipping charges may apply.
- SKU:
- E0775/2000
- Availability:
- in stock
- Weight:
- 1.85 LBS
- Width:
- 1.19 (in)
- Height:
- 79.00 (in)
- Depth:
- 1.19 (in)
- Shipping:
- Calculated at Checkout
Description
Single Angle Corner Extrusion. Provides a framework for cases that are created "box style" with butt joints (overlapping panel corner edges). An alternate choice to our Double Angle Corner Extrusions. Cutting this extrusion follows the same methods as our Double Angle Corner Extrusion. See our cutting tips video tutorial
NOTE: Mill finish unanodized extrusions can commonly incur surface abrasions during shipment from rubbing together if they incur harsh handling during the shipment process. This is not abnormal, and is easy to remedy by rubbing the extrusions with some #0000 Fine Grade Steel Wool, cheaply available at any hardware store.
Rivets Required For Installation: Varies depending on length of section used, as well as associated parts that may be riveted through it.
Depending on your case design some rivets may require backing washers. Most rivets will install through the interior leg of the extrusion and therefore require no backing washers.
RECOMMENDED USES:
All cases regardless of wall panel thickness.
MINIMUM RECOMMENDED CASE DIMENSIONS:
Any case
EXAMPLES
- All Cases
ASSOCIATED COMPATIBLE PARTS:
- All Of Our Corner Braces.
Material: Mill Finished Aluminum
4 Reviews
-
Single angle extrusion
Product is very good My problem is confusing oversize shipping . I was quoted A very high cost to ship $48.00? plus 2 -79" pcs I was told I had to cut to 39"s . I said Ok to save money . They came uncut and shipping was about $14.00 . My last order was much larger cut 12 ft and uncut 79" pcs shipping was $32.00. does not make sense . I was happy where not cut.
-
Protected
The extrusion will give any lateral protection needed. The quality goes without saying.
-
E0775/2000 - SINGLE ANGLE CORNER EXTRUSION and corners
This is a great site - the parts are just what I wanted - strong and they look great. I'm especially impressed by the support I received from them as well. I highly recommend this site.
-
does what it should
dont hesitate to get this. does what it should.
Related Products
Related Products
E2265/2000 - 3/8"( 9.6mm) DOUBLE ANGLE CORNER EXTRUSION (79" Lengths)
E2365/2000 - PANEL JOINER - SPLICE EXTRUSION - (79")
E2367/2000 - 3/8" PANEL JOINER EXTRUSION - (79" length)
E2340/2000 - 3/8" PANEL JOINER EXTRUSION / SPLICE (79" lengths)
E0210/2000 - 3/8 BREAK APART TONGUE AND GROOVE EXTRUSION (79" long )
3109 - 3/8" DOUBLE ANGLE EXTRUSION (12 ft.)
3070 - 1/2" DOUBLE ANGLE EXTRUSION (12 ft.)
E0876 - DOUBLE ANGLE - 1/2" CORNER EXTRUSION (6.5ft.)
