P1301P - Steel Piano Hinge - 72" Long x 2" Wide - Punched At 2" Centers
- SKU:
- P1301P
- Weight:
- 2.26 LBS
- Width:
- 2.00 (in)
- Height:
- 0.05 (in)
- Depth:
- 72.00 (in)
- Shipping:
- Calculated at Checkout
Related Products
Related Products
P1309P - Steel Piano Hinge - 72" Long x 1.47" Wide Punched At 3" Centers
$22.50
PUNCHED STEEL PIANO HINGE - PUNCHED AT 2" CENTERS
72" LONG X 1.47" WIDE - 0.048" THICK - ZINC PLATED STEEL
P81507Z-DOUBLE SWIVEL PIANO HINGE - 72" Long Punched at 3" Centers
$52.50
Eliminates the need for taking two separate pieces of piano hinge and welding or riveting them together.Allows the case lid to rotate 270°, giving full strength to said lid.
1965 - PIANO HINGE 2"/ continous steel - punched - 6ft lengths
$17.90
Steel Continuous Hinge
Open Hinge
1.83m / 72" LengthPunched 50.8mm / 2" Centre
P1327 - PRE PUNCHED - 3" long hinge
$4.30
Hinge For Hinged Lids - This hinge easily creates hinge lids for your case. Rivets Required For Installation: 6Depending on your case design and dimensions, some rivets may require backing...
1923 - PIANO HINGE - 1.5" / continuous steel
$15.40
Steel Continuous Hinge (AKA Piano Hinge) - This 1.5"-when-open hinge provides for full-length, side-to-side, coverage for attaching your lid to the body of your case for smoothness of...
D0607K-RECESSED STEEL DISH-punched for 2 @ 1/4" jacks
$4.90
RECESSED STEEL DISH-PUNCHED FOR 2 @ 1/4" JACKS. BLACK POWDER COATED
D0602K-RECESSED STEEL DISH-punched for 2 Neutrik D series +2 @ 1/4" jacks
$6.40
RECESSED STEEL POWDER COATED DISH - PUNCHED FOR 2 NEUTRIK D SERIES + 2 @ 1/4" JACKS
3158 - ANGLE CORNER EXTRUSION-PRE PUNCHED 1 1/2" X 1 1/2" (12ft.)
$37.20
Pre-punched Heavy Duty Single Angle Corner Extrusion. Rivet holes are pre-punched every 3". Alternative to double angle corner extrusions.THIS ITEM SELLS IN 12 FT. STICKS and must be CUT in...
D0944K-RECESSED DISH-STEEL-PUNCHED FOR 1 @ 1/4" JACK
$4.90
RECESSED BLACK STEEL POWDER COATED DISH. PUNCHED FOR 1 @ 1/4" JACK