S1148 - RIVET BACKING WASHER
- SKU:
- S1148
- Availability:
- In Stock
- Weight:
- 0.50 LBS
- Width:
- 3.00 (in)
- Height:
- 3.00 (in)
- Depth:
- 3.00 (in)
- Shipping:
- Calculated at Checkout
Description
Backing Washer For Our Rivets - May be used in conjunction with all of our rivets. Creates a strong internal backing for maximum holding strength. Used when rivets install with bare wood internally and when there are no extrusion legs inside for a particular part installation, such as ball corners, handles, some latch mounting holes, etc.
Rule of thumb information: Purchase 1/2 as many backing washers as rivets.
RECOMMENDED USES:
Installation of parts, hardware & extrusions
ASSOCIATED COMPATIBLE PARTS:
- All parts
Material: Aluminum with steel mandrel
Related Products
Related Products
6700 - EXTRA LONG "POP" RIVET
$0.12
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 24mm / 15/16"
Grip range 15.9mm / 5/8" - 19mm / 3/4"Backing Washers available
6660 - POP RIVET - 1/4" CASE WALL
$0.10
1/4" Case Wall Rivet - May be used in conjunction with parts and extrusions associated with the construction of cases with 1/4" walls.May be installed with pneumatic rivet gun or manual hand...
6690 - POP RIVET - 3/8" & 1/2" WALL
$0.11
Smooth Rivets with Aluminium Body and Steel Mandrel
Diameter 4.8mm / 3/16"
Length 20.6mm / 13/16"
Grip range 12.7mm / 1/2" - 15.9mm / 5/8"Backing Washers a
L0906 - BACK PLATE FOR MEDIUM SIZE LATCHES
$2.70
Our template backplates provide a two-purpose solution - They are a great for using as a template for making your cutouts in the case walls, and then can be used in place of individual...
L0737/BP - BACK PLATE FOR SMALL VALANCE SPANNING LATCHES
$2.30
Our template backplates provide a two-purpose solution - They are a great for using as a template for making your cutouts in the case walls, and then can be used in place of individual...
L0747/BP - BACK PLATE FOR LARGE VALANCE SPANNING LATCHES
$2.90
Our template backplates provide a two-purpose solution - They are a great for using as a template for making your cutouts in the case walls, and then can be used in place of individual...
S1032/HP/1 PC - RACK RAIL SCREW AND WASHER COMBO
$0.24
10/32 UNF Rack Screws With Built-in Heavy-duty Nylon Washer. Used for mounting your rack gear to our pre-tapped rack rail holes.
H1435Z - SNAP BACK RECESSED SHACKLE (H1460 backplate sold seperately)
$11.50
SNAP BACK RECESSED SHACKLE-ZINC PLATED - WITH ROPES OR CHAINS - SWL 1,100 POUNDS / 500 KGS WHEN USED WITH H1460 BACKING PLATE - SOLD SEPERATELY